|
|
Posted by Paul (in NY) [12.64.126.25] on Tuesday, March 22, 2011 at 10:48:37 :
In Reply to: Drain Valves posted by Jason [75.37.55.217] on Tuesday, March 22, 2011 at 10:37:45 :
Without question, I would use 1/4 turn brass ball valves. They are not that costly, even at the local board store. Good valves will probably never need replacing. Just exercise them as routine maintenance so they turn freely. My system as been in service since 2000. I have never once had a issue.
Paul