Re: What could have caused...


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by rick pacholski [98.26.211.168] on Monday, February 28, 2011 at 17:10:41 :

In Reply to: Re: What could have caused... posted by Mike Hernke [63.151.218.18] on Monday, February 28, 2011 at 16:40:53 :

Mike; 5' pipe, 260 lbs of me on the end. Son heated case using oxy/acetylene rosebud (Thanks again, Chris.). Three previous attempts failed due to my lack of knowledge. Found two 1/2" pieces of pins in body. ? Reassembly was easy. I froze the cap (Thanks again, Milo.) and left the case in the sun. Spun right on to very tight (less gap than at start) with minor adjustment tighter to perfectly align pin holes. Flush pressed pins with drift and then peened hole edges to hold them in. I know now what to do should I need to rebuild the front diff.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com