If you don't have a rosebud, use the cutting torch.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Chris Case [63.199.245.248] on Saturday, February 26, 2011 at 13:07:22 :

In Reply to: OK... After a full 45minutes... posted by rick pacholski [98.26.211.168] on Saturday, February 26, 2011 at 12:23:46 :

You need to heat the female side fast enough that it gets hot before the male side swells from the heat also. Big tip needed.

I use the cutting torch. But to be sure NOT to cut with it, open the little oxygen valve all the way before cracking the main oxygen valve to adjust the flame. That way, pushing the lever can't give it any more oxygen.

You'll want to wait for it to get stone cold again before trying. You want the male side shrunk from the cold.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com