|
|
Posted by The Dodge Boys [64.121.152.7] on Wednesday, February 09, 2011 at 19:01:29 :
In Reply to: Brake Drum Hub Removal Question '48 FFPW posted by gmharris [71.105.178.157] on Wednesday, February 09, 2011 at 18:51:35 :
OK after you have the screws out. spray with WD40 or like that and stand back.Cold Beer a good smoke then go to work. You dont have to fool with the wheel studs,let them be. Hit around with a hammer, a tourch helps.Or take the wheel bearings out and pull the hole hub/drum to work bench and go from there. They can be stinkers if they have been on a long time. Good Luck Bill.