Posted by Hemi Power on Friday, January 12, 2001 at 7:47PM :
In Reply to: Ladder bars or traction bars for powerwagon! posted by sean abeman on Friday, January 12, 2001 at 1:00PM :
i used 3 sets of rancho kicker shocks on mine.
to prevent rear end wrapup and jumping.
i had traction bars on mine but was always destroying rubber bushings and bumpers and bending and tearing brackets.
the shock does simular thing but alot less aggressive.
i have 2 sets on the rear and 1 set on the front.
i had to make all the brackets for the front.
i use timbren load boosters to stop rear jumping up and down.
removes so much vibration this way.
lets truck flex instead being ridged.
this works good for me everyones application is different.
1970 W-200
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |