Posted by Will (in IL) [98.215.26.138] on Tuesday, January 11, 2011 at 10:44:27 :
In Reply to: rear axle shaft removal --stumped again posted by tom [68.231.186.116] on Tuesday, January 11, 2011 at 10:39:13 :
You should find two threaded holes in the axle flange. With the axle retaining nuts removed install a bolt into each of these threaded holes and turn each bolt equally. This will press/force the axle flange away from the bub, and at some point it will be loose/free.
Will
Follow Ups: