Well, the Tranny is back in the 49 PW, but ...


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Will (in IL) [98.215.26.138] on Saturday, January 08, 2011 at 18:30:44 :

I've installed the Brake and Clutch Pedals back in the 49 Power Wagon. As well as the Tranny, but it looks like the clutch plate is stuck to the flywheel (M37 engine, flywheel, clutch and pressure plate).

I'm getting good at removing and installing trannies by my self, and as I hope this one isn't stuck too bad, I'll wait until I get the truck running and see if it will brake loose (without braking anything). If not, I'll remove the tranny so I can pull the clutch.

Wishing now I'd pulled the pressure plate before I installed the bell housing, but I was more concerned about getting the engine secure and not leaving it hanging from the hoist.

I cleaned off (not cleaned up) the tranny, and removed a good 5 pounds of caked grease from it. At least now you can tell it's a transmission!

Will



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com