Re: truck rear is lopsided


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Daryl in Oz [210.50.228.4] on Thursday, December 09, 2010 at 03:11:20 :

In Reply to: truck rear is lopsided posted by junior [64.136.27.229] on Thursday, December 09, 2010 at 00:41:36 :

Had a similar problem with mine, turned out the spring on one side had to be reset. I rebuilt both spring packs at the same time and they looked the same, but after sitting a while I noticed one side lower. The more bodywork I added, the worse it got, so I blocked up the frame level so every thing was square and finished assembly. Took it off the blocks and drove it a couple hundred yards and one corner was 2.5" lower than the rest. Pulled that spring and reset it about 3" higher than it was, put it back in and all level.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com