|
|
Posted by bill in pa [75.197.192.109] on Thursday, December 02, 2010 at 15:43:16 :
In Reply to: removal of brake drums, '57 posted by tompow [65.122.15.169] on Thursday, December 02, 2010 at 15:19:50 :
there are three straight head screw slots on the face of the drum between the weel studs. If you can get them out that will seperate the drum from the hub to gain access to the shoes....
OR remove the center nuts holding the axle shaft in. remove the nuts and bearings behind them,, Then the drum and hub will come off as a 1 piece assembly. Hope this helps,
Follow Ups: