Posted by Kaegi [71.227.129.92] on Sunday, November 28, 2010 at 01:38:53 :
In Reply to: And some more thoughts on axle design... posted by ChrisCase [63.199.242.59] on Saturday, November 27, 2010 at 21:55:21 :
according to the manual I have the specs are: Camber 1 1/4 to 1 3/4 degrees,
Caster With driver adn normal load 1 to 2 degrees, with no load 0 to 1 degree. I would start samll maybe 1 degree increments till you are happy. with 36 inch tires it does take much change at the axle to have a big effect at the ground.