|
|
Posted by mannyc [68.165.89.2] on Wednesday, November 24, 2010 at 10:46:50 :
In Reply to: cab roof seam posted by keithwolfe [98.236.84.49] on Wednesday, November 24, 2010 at 10:39:28 :
i would personally grind it all out and weld in new metal. clean up the area and weld primer the entire area. butt weld the metal if possible to prevent lapping and places where water can hide! smooth vs seam, id rather not be 100% orig, but 100% rust free.