O.T. hydraulic jack question


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Doc Dave [24.245.101.30] on Wednesday, October 27, 2010 at 10:00:58 :

I have an older Blackhawk jack. It is 4 ton and 4 feet long, works really good on heavy things like the PW.
It goes up without a problem and holds the load. It will come down with a load normally too. The problem, though, is that recently it will not retract on its "own weight", I have to push it down with a little pressure. This is sort of a hassle for example when you let the truck down and when the wheels touch, the jack no longer will retract downward any more without pushing on the saddle. I have lubed it up so there is plenty of grease, etc at the joints.
IS there a relief port or something that is clogged, and if so is it easy to clean out? They still make rebuild kits but they are about $150 dollars or more and I thought there was an easier fix?



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com