Posted by Vaughn [99.120.33.165] on Monday, October 25, 2010 at 21:37:10 :
In Reply to: wheel cylinder size posted by chris [69.112.140.198] on Monday, October 25, 2010 at 21:07:49 :
Front of cylinder housing 1-1/4, rear 1-3/8. You could probaly also use one that has 1-3/8 at both ends. 3 things that are important in interchaging:
1 - Should have same style piston to receive shoe
2 - The raise circle on the cylinder housing has to be the same diameter as the old housing.
3 - The two mounting bolts center to center measurment has to be the same as the old.
Good price on the cylinders. I would take them apart and inspect. They can and do develop rust inside if they have been setting for a long time.