|
|
Posted by Doc Dave [66.82.9.57] on Thursday, October 07, 2010 at 08:17:42 :
In Reply to: Bed kits posted by Ron in San Mateo [75.18.206.6] on Wednesday, October 06, 2010 at 21:04:15 :
I used Mar-K for the angle strips and center strips, very good quality and service.
Milo is right, be sure you have the correct orientation on the wheel well angle sections before tack welding them.
I also used Bruce H for my varnish. Again, excellent service.
So, I have good experience with both.