Re: 77 Ignition thoughts


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Captain Morgan [174.57.195.215] on Tuesday, October 05, 2010 at 16:28:40 :

In Reply to: 77 Ignition thoughts posted by Hemimech [68.188.184.28] on Monday, October 04, 2010 at 20:40:02 :

Thank you very much for your help. I bought a new ballast resister and a new starter relay. It ended up being the ballast resister. The one side was supposed to be reading 1.12 - 1.38 ohms and it was at 1.8. When I turned it over I could see that the one side was all brown indicating it must have been bad. When I went to start the truck it would not crank. So you ended up being right about that. The ignition switch which had been working is now not working. Not giving power to starter relay. Hooked up the original ign switch I had replaced and all is working. And the truck turns off. Thank you for all your help.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com