|
|
Posted by Terry in Md [70.32.206.157] on Sunday, October 03, 2010 at 09:43:02 :
In Reply to: Ring gear thickness related to gear ratios ? ... posted by Chriscase [75.36.47.88] on Sunday, October 03, 2010 at 08:50:20 :
I have a 70F from an IH pickup in my 56 pw-126. I used the Power-lok from a rear Ford Dana 70 in it. The pinion from were the same but the ring gear would not fit in the housing. Too thick. The carriers appear to be the same as long as you observe the 3.70/4.10 splitting point. I could not find a r&p numerically lower than 4.10 for the 70F