Posted by Charlie on Tuesday, December 19, 2000 at 01:55:23:
In Reply to: This might work ....? posted by gtk on Tuesday, December 19, 2000 at 00:33:21:
Yes, but the 8.75" early WC 1/2 ton diffs use 1.3125" axle shafts. And the book (TM 9-1808C) says ALL the 8.75" diffs are 2 pinion gears (one shaft), not 4 pinion gears (2 shafts). The Lockright requires two pinion shafts to locate it in the carrier and work properly as far as preloading which is an important part of its' functioning.
Charlie