|
|
Posted by Chriscase [76.212.214.182] on Sunday, September 05, 2010 at 00:47:53 :
In Reply to: Throttle Shaft Bushings? posted by Dave Horvath [76.125.249.141] on Saturday, September 04, 2010 at 07:44:40 :
I just lately read how, since them little screws are peened on the end.
Tighten the screws until the heads break off, then grip the far end opposite where the head was before you broke it off and screw it out the wrong way. They do them that way on purpose, note that the screws stick out the far side far enough to get vice grips on.