|
|
Posted by Daryl in Oz [210.50.143.21] on Monday, August 09, 2010 at 23:51:26 :
In Reply to: Daryl and everyone else that is throwing in posted by clueless [201.197.231.58] on Monday, August 09, 2010 at 21:58:53 :
The higher the compression ratio the better propane works. 10:1 is good and side valves work well on gas. If you go straight gas, get your distributor set up for it, you need more advance early and slightly less later. For a start, set ign timing about 7 to 10 degrees before TDC if you are set up this way.
Follow Ups: