|
|
Posted by Randy in NJ [24.187.41.239] on Wednesday, July 28, 2010 at 09:06:47 :
In Reply to: front winch u joints posted by richnj [69.115.252.7] on Tuesday, July 27, 2010 at 22:36:43 :
I used universal (I think Spicer) U joints, off the rear of the pto of the tranny with drive shafts to the rear crossmember to run a sawmill. The front of the pto was connected to the winch. The rear driveshafts are 1 1/8" round stock with a 1/4" keyway cut.