|
|
Posted by Kaegi [71.227.129.92] on Wednesday, May 19, 2010 at 19:44:02 :
In Reply to: Re: m37 transfer case posted by Mike Hernke [63.151.218.18] on Wednesday, May 19, 2010 at 17:07:18 :
you can shim the axle and/or tcase to get the correct angles. I put a 2 pseed tcase in a WC52 and WC57 and the drivline was les than 30 inches long and the angle was no where near too steep. I think it was about 4 degrees. As long as the angles are the same you should be fine.