Re: Fuel delivery vapor lock problems still


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Dave Royal [75.81.246.156] on Monday, May 17, 2010 at 11:53:11 :

In Reply to: Fuel delivery vapor lock problems still posted by Galen [67.142.168.148] on Sunday, May 16, 2010 at 19:48:48 :

Galen, have you thought about trying to isolate the carb from the manifold? the plastic bowl on the old thermoquad carbs was for the purpose of keeping the carb and fuel cool. if a fiber gasket about 3/8's to a 1/2 inch was installed between the carb and manifold, would it help keep the carb cooler? and thereby keep the gas in the carb and not pushing thru the needle and seat and into the engine? when I drag raced we would run an insolater between the carb and manifold with a shield to keep the heat off the carb, it worked, but I don't know if it can be applied to this? Dave.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com