|
|
Posted by Milo/ in/ Pa [71.116.29.166] on Wednesday, May 12, 2010 at 13:37:28 :
In Reply to: Thanks, and more info posted by David Sherman [24.32.202.83] on Wednesday, May 12, 2010 at 00:32:56 :
I have seen the plastic gears on the distributor wear out. Also if you need to advance the tinning more there is another bolt on the underside of the distriburor loosen it and you can advance it more. And does this engine have a EGR valve I Know they would hesitate badly if they open too soon.