|
|
Posted by Paul(in NY) [12.64.108.116] on Thursday, April 15, 2010 at 21:23:44 :
In Reply to: Front knuckle 25 ft lb drag...really? posted by Matthew F [98.194.46.80] on Thursday, April 15, 2010 at 20:34:13 :
In addition to what Kevin shared, you will be using a inch pound bending beam torque wrench to measure front knuckle rotation. Its all feel, there is no given rotational torque with bearings top and bottom. This is a modification done many years after Chrysler engineered the knuckles.
Paul