Re: DTA header experience?


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Dave Royal [75.81.247.197] on Wednesday, April 14, 2010 at 11:10:57 :

In Reply to: DTA header experience? posted by Ron in San Mateo [75.18.208.4] on Tuesday, April 13, 2010 at 22:15:57 :

Ron, have you checked the straightness of the manifold? if the manifold is heat warped and it gets installed that way the flex will get the manifold in short order. most shops will check and cut to straightness. also do not use a thick gasket, as that also contributes to cracked manifolds (uneven toruque on the fasteners) allowing the flex again to stress load the manifold. it is very importent for the maniflod to be flat on the mounting surface. Dave.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com