|
|
Posted by D Sherman [216.18.131.91] on Sunday, March 21, 2010 at 04:23:24 :
In Reply to: Wanted: 230 exhaust manifold posted by Dan [75.219.0.141] on Saturday, March 20, 2010 at 22:10:07 :
You will want to specify where the outlet is or you might get the wrong one. I've seen 3 versions -- center dump, back end angled backwards, and back and turned 90 degrees. One of mine had the outlet cut off and welded on at a different angle. I believe all trucks were rear dump, and possibly all were angled, but since 230s were used on boats, welders, combines, and all kinds of things other than trucks, there's a good chance a take-off manifold wouldn't be the version you need.
Follow Ups: