Re: Steering setup question, WDX


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Daryl in Oz [58.179.143.41] on Saturday, March 13, 2010 at 21:57:06 :

In Reply to: Re: Steering setup question, WDX posted by Tim Holloway [69.54.28.229] on Saturday, March 13, 2010 at 20:39:12 :

When you say it has more turns with the arm off, is the arm connected to the drag link? If so you need to find out what is binding. With the pitman arm only connected, it should still go full lock to lock. If the drag link is connected to the pitman arm without being connected to the front end, it should still go full turns, etc. The stops on the front end only come in to play to limit travel east/west if you get my drift. Sounds like there's something wrong in the way the drag link is connected to the pitman arm - either springs and cups wrong or the link is in backwards. The way you set it up was correct, so if you get more turns one way, something is binding up or otherwise limiting you in the other direction.




Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com