Posted by Chriscase [76.212.163.231] on Thursday, March 11, 2010 at 10:05:49 :
In Reply to: Water temp. gauge-What is best Mechanical or electrical? posted by junior [64.136.27.226] on Wednesday, March 10, 2010 at 21:08:43 :
Search the archives, there is a link in there somewhere.
You need to buy a new mechanical one, freeze the bulb into a block of ice, cut the capillary tubes both old and new under the dash, use a red electrical crimp splice with the plastic cut off as a splice, solder joint, open up the gauge for calibration using a pot of boiling water.
Follow Ups: