|
|
Posted by Ken from Worcester [24.177.53.235] on Wednesday, February 17, 2010 at 20:21:57 :
In Reply to: Cracked piston posted by Robert N [70.184.66.179] on Wednesday, February 17, 2010 at 11:52:29 :
I would bet it is a bad rod bearing I have been there twice with my m37 when the motor gets up in years the clearance in the bearings
opens up lowering the oil pressure which causes the rods on the end of the crank to starve for oil then all it takes is a good ride on the highway and rap rap rap
good luck ken