|
|
Posted by David Sherman [24.32.202.83] on Friday, February 12, 2010 at 15:56:48 :
In Reply to: Re: Layout question posted by Jerry in Idaho [64.139.238.43] on Friday, February 12, 2010 at 14:51:31 :
1. 2" nominal
2. Yes.
3. somewhere in the middle. Two pairs of holes at 90 degrees from each other and about 5' apart. I will put a pipe sleeve through each pair of holes and weld it in to avoid weakening the pipe and so I can tighten a bolt down through the holes without compressing the pipe.