Re: '67 WM 300 Front Differential


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Kaegi [24.113.81.122] on Monday, December 14, 2009 at 16:51:13 :

In Reply to: Re: '67 WM 300 Front Differential posted by Nick [71.142.249.41] on Monday, December 14, 2009 at 16:35:55 :

that is good news. I would pull the drum/hub and drill out on a drill press. you can buy reverse drill bits if you like. then what hopefully happens is the drill bit eventually catches the on the stud and unscrews it. Or just drill out with regular bits. start small and go up. They are coarse thread in the hub and fine thread out on the flange end. They are not reverse thread. Or if someone local has a hub and drum assembly switch it out. It is better to buy a drum and hub together if you r going used because the drums get machined when mounted on the hub. Mix matching old drums and hubs usually results in a drum so out of round that there is not enough material to machine out the problem,



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com