|
|
Posted by roger king [206.74.195.22] on Tuesday, December 01, 2009 at 11:27:27 :
In Reply to: So what does ... posted by Will (in IL) [98.215.26.138] on Monday, November 30, 2009 at 21:11:59 :
we can usually get a set for $800 to $1000. the pinion brake set up we use is home made. it takes a braket(preety easy to make or you can buy for around $40) 2 toyota calipers. junk yard $50 2 mazda truck rotors $32. the rotor require a liltte machine work. we do it here in about 30 minutes so say $50 machine work. so about $1172 plus you will need hydro steering( not required but much easier). so vavle $250, ram $75, steel and bolts $50 hose $75. so another $450. thats $1682. i beleive the cost to install would be around the same with any change. last time i checked that is cheaper than longfeild shafts alone. stock u joint shaft will hold up well up to 6500lbs, 44 tires and 400hp. if you exceed that it will depend on terain and driving style. merry chrismas to everyone .
Follow Ups: