|
|
Posted by Joel Wilkins [162.58.82.136] on Monday, November 23, 2009 at 11:16:57 :
I'm going with a modern engine/trans so my newly rebuilt 230 long block needs to go to a new home.
engine was completely dissasembled, hot tanked and primed, it has new pistons, .030 over bore, valve train done with new springs / tappets / new exhaust valves. misc new bearings. new timing gear and chain, new crank timing gear, flywheel resurfaced.
I have most other used parts to complete engine assembly but they are not restored. including bellhousing, orig clutch assemb and forks, and front engine mount. no carb but have oil bath air cleaner assemb and upper end oil resevoir.
engine is not assembled except for cam and valves. engine has not been run since machine work was done and has been stored inside garage.
work was done by Denny's Machine Shop in Williamsport, MD.
Also have dissassembled orig 4spd trans included. keeping the transfer case.
local pick up only . call or email anytime 540-532-0566