Re: door striker removal


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Brian Holt [154.5.119.29] on Sunday, November 22, 2009 at 22:13:20 :

In Reply to: door striker removal posted by patrice pilon [74.13.145.243] on Sunday, November 22, 2009 at 21:52:41 :

I am sure it is the same as my 48 which I just took apart the other day. I was confused until I looked at the replacement piece.
I take it you have already taken the door handle and assembly apart.
Before you loosen off the four screws that are holding the striker, make sure you pull on the bar which is attaced to the striker. This will unhinge the bar which will allow it to swing upwards towards the window opening. Now you can take out the four screws and lower the striker towards the bottom of the window frame. As the striker is lowered make sure the bar is lifted towards the window, now you can twist the striker 90 degrees which will allow it to clear the window channel. Now you can pull it from the door.
I hope this helps you my friend.

Brian Holt
Denman Island, BC



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com