Booster from some Ford, MC from Chev 1 ton.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Chriscase [76.212.168.173] on Saturday, November 21, 2009 at 00:26:51 :

In Reply to: chriscase...question posted by chrisnj [68.39.48.179] on Friday, November 20, 2009 at 21:42:49 :

Boosters are almost generic, the small thick ones have dual diaphragms so have as much force a the big thin ones.

I took the master off of a Chev 1t. Don't know the size, I never rebuilt it. It works.

I used the bell crank and bolt from a Dodge van. Had to grind off one arm and reweld to make it 180° instead of 90°.

Don't do it if you get into deep water. The booster will fill up when you step on the brake. I may make a system of sealing the under floor vent, then venting it into the cab like Dodge did when adding the optional Hydra-Vac system. Ya know, the one with the little filter under the seat.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com