Re: Need a V.I.N. for my '57 Civialian P.W.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Paul ( in NY) [12.65.0.150] on Saturday, November 14, 2009 at 17:15:31 :

In Reply to: Need a V.I.N. for my '57 Civialian P.W. posted by Jack McDevitt [65.175.163.51] on Saturday, November 14, 2009 at 14:28:00 :

Did you check both sides of the frame (right and left). It appears that for some reason, the BIN is not always on the left frame rail, just aft of the front end. Check both sides, it will not be a PLATE, the number is stamped in the frame. Sometimes the stamping is faint, then rust hides it. Try wire brushing both front ends of the frame rails. Then lay a piece of white paper on the frame rail and with the side of a pencil lead go back and forth over the white paper. IN some cases the VIN can then be seen on the paper.

Paul



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com