broken studs on power wagon emblem


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Doc Dave [69.19.14.34] on Tuesday, October 06, 2009 at 07:12:55 :

Any suggestions on dealing with this? The studs were corroded and weak, and a few of them cracked off when I tried threading a nut on them.
I have about 3/16" left on the studs.
Out of the 5 emblems, three are fine, one has one broken stud, and one has two broken studs.
Could I try to JB weld a section of 1/4 threaded rod, and also some 3M double sided trim tape to help hold the plate to the hood?



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com