|
|
Posted by Daryl in Oz [210.50.82.2] on Wednesday, September 02, 2009 at 04:55:01 :
In Reply to: Follow-up for the COTM and a question posted by John (in NH) [66.30.80.118] on Tuesday, September 01, 2009 at 20:08:32 :
John, you could try pulling the dust pan under the flywheel, then loosen the bolts holding the pressure plate about 1/4". Push clutch pedal in and out a few times. Leave your special tool in place over-night with those bolts loose, then try and break it free carefully. Also helps to have the bolts loose if you try a lever or blade in there. Good luck. If I am laying a vehicle up for the winter, I always give the clutch a bit of a work-out to make sure it's properly dry before I shut it down. Other thing is if this happens every year, leave your special tool in place - might help.
Follow Ups: