Posted by Tim Holloway [69.54.28.229] on Tuesday, September 01, 2009 at 21:30:54 :
In Reply to: Follow-up for the COTM and a question posted by John (in NH) [66.30.80.118] on Tuesday, September 01, 2009 at 20:08:32 :
Hi John,
There is a sheetmetal cover on the bottom of the bellhousing. Has 4 or 6 small bolts that hold it on. Pull that off and you should have enough access to try to work a really thin putty knife blade in between the flywheel and the disc.
A lot easier than pulling the front clip, engine and tranny, but thats probably what the manual says to do.
Tim
Follow Ups: