|
|
Posted by Jerry in Idaho on Friday, July 10, 2009 at 10:57:33 :
In Reply to: Re: oil line question posted by Tom Petroff (IL) on Friday, July 10, 2009 at 06:36:16 :
You are welcome. My only concern is that it would seem the inlet to the filter should be under more pressure than the outlet from the filter. If any particular spot on the block produces more pressure that should be the one used to supply the inlet on the filter. As an example, I remember the old Franz filters were installed with the inlet line coming from an adapter at the factory oil filter, and the outlet line from the Franz unit simply dumped into the oil pan through a special fitting. This utilized the pressure from the engine to provide more cleansing. JH
Follow Ups:
