Pulled the heads on the PW today


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Tim Holloway on Saturday, June 27, 2009 at 16:46:53 :

Well, you recall a couple of weeks ago I had a spark plud disintegrate in #7 cyl in my 318 poly. In replacing the plugs all around I found I had low compression on all 4 of the cylinders of the drivers side. When I put this engine in, I reringed it, but didnt touch the valves. Wanting to see if there was any spark plug debris in the cylinder, this seemed like a good time to pull the heads to get the valves taken care of. Going to have hardened seats put in while they are at it.
BYW, there was no evidence of the plug in the cylinder, and no scarring or damage.
While I have the brake booster and MC out, I am converting over to a hydroboost system. The vacuum booster is just too darn big.
Tim



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com