Posted by Steve Ostroski on January 29, 1998 at 22:20:00:
My 1962 M-37 has a problem I need some advise on. The temp. gauge needle never moves off of the 60 degree mark. When you turn on the ignition the needle on the gauge moves, as if the gauge is getting power, but when driving the needle never moves off the 60 mark. Here is where it get weird. I have replaced both the gauge and sending unit . But to my great surprise the same problem still exists. Could this be a bad wire from the gauge to the sending unit or do I just have the coolest running M-37 around? Any advise appreciated Steve O.