|
|
Posted by Bubba on Wednesday, June 03, 2009 at 20:01:00 :
In Reply to: Hypothetical Hemi / Poly question posted by Tim Holloway on Wednesday, June 03, 2009 at 19:21:34 :
you will need.
1. complete water pump housing from the hemi with engine mount intact.
2. the hemi heads
3. the hemi intake
4. your 315 poly pistons arent domed...so you will need a set of hemi domed pistons. Unless you want a compression rating of about 5:1 lol.
5. BY THE TIME YOU HAVE ALL THE PARTS YOU SHOULD HAVE PROBABLY BOUGHT AN ENTIRE HEMI ALREADY...WHY NOT USE THAT? OH YEAH..IF ITS NOT A TRUCK HEMI, IT WONT HAVE THE CORRECT WATER PUMP HOUSING FOR THE MOTOR MOUNT. TRUCK HEMIS ARE NOT A DIME A DOZEN, AT LEAST NOT THE ONE YOU NEED.
6. YOU WILL NEED THE HEMI RADIATOR, AS THE LOWER HOSE LOCATION IS ON THE OTHER SIDE THAN YOUR POLY( I could be off on that, but I am pretty sure they are different on the water pump housing.)
Its alot more work than people think to do it right and make it look stock.
Hope this helps some.
Follow Ups: