|
|
Posted by David on Sunday, May 24, 2009 at 02:11:47 :
In Reply to: Calling All NV4500 Experts.... posted by Marty on Sunday, May 24, 2009 at 00:57:54 :
Marty, your on the right track. My NV4500 manual says to first disengage the rubber tower boot from the tower and slip to T2024 stub remover under the boot. The lugs of the tool will fit against the flats on the spring cap. Push down on the handle to drop the spring cap below the retaining pins. It does take a bit of force to depress the spring. Turn the tool handle counter clock wise and the cap should pop up and the shift tower assembly should be free.
Follow Ups: