Posted by Ed Tavernier on Wednesday, April 08, 2009 at 00:11:12 :
In Reply to: Need some 354 truck hemi advice... posted by Dave in Austin on Tuesday, April 07, 2009 at 23:14:17 :
Dave,
It is possible to replace the yoke on the drum of the FFPW transfer case with one that will allow the adaptation of a universal joint. This in turn means that one can run a driveshaft off of the more centered transfer case output.
It may be possible to find a yoke for the transmission brake drum that will allow the similar use of a divorced transfer case...
On my PW I am running a NP435 4 speed with the two PTO ports to allow the winch PTO in the correct place. It is mated to the standard NP 200 transfer case.
I am not sure which bellhousing/clutch would allow the mating of the NP435 to the Hemi. Paul in NY or DC in Oregon would better serve your inquiry....
Eddie
Follow Ups: