|
|
Posted by copey on Tuesday, March 24, 2009 at 11:07:42 :
In Reply to: OT but Dodge posted by Kurly on Tuesday, March 24, 2009 at 10:00:23 :
Hold on to the curleys kurly first i have never seen that much fuel get in a engine via the choke unless you pour it in out of a can down in and still it wouldnt go through the cylinders it would lock the crank if you did > the gas probabaly got in threw the fuel pump diaphram a rupture in it and posibbly pumped in the fuel> two possibilties exsit here one the oil pick has floated to the crank and stuck up and is banging away > second poss is that the fuel pump is tapping it self to death with out any back pressure > but before you pull the engine do a post mortum i as call it > be certain what went wrong it could be as you say a spun bearing it could be anything ? but work smart not hard and the slant 6 is a good mill cant see how it spin > when we scrap a slant six car or truck > we all bet on how long it will run with out oil last ran ran 4 and half hour then we put anti freezein the crank it still ran and then we cut the rad hoses and it still ran takes a lot to kill them ~ Copey keep us posted on your findings
Follow Ups: