|
|
Posted by David on Saturday, January 31, 2009 at 15:01:05 :
In Reply to: Keith from Wa was right on the Tucker posted by David Sherman on Saturday, January 31, 2009 at 03:03:10 :
Take them to a good shop and have them welded up. If they are all buggered up what do you have to lose? They should last until you find replacements.
If your axles are held in by a C-clip you will need to remove the large retaining pin in the third member and push the axle shafts inward until the clips are released, and can then be slipped out. The pin (about 1" dia.) stops the axles from moveing inward and the clips falling out on there own. If it doesn't have a rear cover on the pumpkin then you won't have C-clips.