Posted by Vaughn on September 09, 2000 at 10:37:01:
For those of you that have the old style power wagon, I have found some rubber cylinders very close to the originals sizes. They will only need to have their holes drilled. Contact Metro Moulded Parts www.metrommp.com. The part numbers are Front, RS-10, Rear, RS-11. The original measurements for the front insulator 1.0Hx2.5W, Metro's 1&5/16thsx2&5/8thsW. Rear 5/8Hx2.5, Metro's 7/8Hx2&5/8W. Your cab will set a little higher, but I think you will find that acceptable. You can also use the RS-10 for the under the frame insulator. I don't have a current price, but in an aolder catalogue they list for, RS-10 =$9 each, RS-11 =$7 each
If you decide to replace your sagging old insulators:
1. Loosen the steering box bolts, so the steering tube can reangle without a bind,
2. And also the steering tube bracket in the cab, so the tube can move up and down freely.