Re: 318/360 identification.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Don Williams on Wednesday, November 19, 2008 at 22:53:54 :

In Reply to: 318/360 identification. posted by Caleb (Kansas City) on Tuesday, November 18, 2008 at 20:48:35 :

There is "usually" a raised casting number on the side of the block that ends with 360 for the 360 engine. A sure way to tell without tearing the engine completely apart and measuring internals. Look at the ends of the oil pan where the 1/2 circle shape is. A 318 will have appx. the same size 1/2 circle shape at each end. A 360 has a noticeably larger 1/2 circle shape at the rear of the oil pan. When you see the two oil pans side by side it is quite easy to see. Many a 318/360 swap has been done without taking this into consideration only to find a humongus oil leak at the rear of the oil pan.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com