|
|
Posted by The Dodge Boys on Thursday, October 02, 2008 at 20:15:47 :
In Reply to: Timing Cover Coolant Leak posted by Tim Brake on Thursday, October 02, 2008 at 11:27:42 :
Hay, Bill in PA is right on. The timming cover is warped. Must lay the cover on a flat surface to check the cover. Or use a straight edge. I have seen this before.The machine shop that I use has a big stand alone belt sander. If u can find one just take off as little as posible to make it straight. Good Luck Bill.